A bolt on gearbox beam for Volvo 700 and 900 series for BMW 6-speed gearboxes. Complete with screws and rubber bushings.

Fits many of BMW’s 6-speed ZF gearboxes from -00 to the beginning of the -10s (see example boxes and dimensioned attachment)

Fits bolt on together with the standard loose mount on the back of the box from the 3 series.

* E90/E91 320D (GS6-37**) and 325D/330D (GS6-53**)

And also from E60 and late E46 with GS6-37** if you change the original bracket in the box to one from E90/E91 (as seen in one of the pictures)

E60 520D (GS6-37**) 525D/530D (GS6-53**)

If you don’t have this bracket, you can buy our replacement, which also has a longer adjustment in depth, which you can find here AS-002002-10

If you are looking for a gearbox for the older 6-speed manual Getrag box that is in the E39 540 and M5 (S6S 420G), then this AS-002001-02

NOTE. that there is a different slope on BMW’s petrol engines and diesel engines. It works well if they are rewelded with a new sweep to another engine.
But you can e.g. don’t put a diesel gearbox on an M50 even if they fit together with the others, because the gearbox will then tilt 10 degrees if you don’t re-weld it.

If you are going to drive with a BMW M60 /M62 engine together with this bracket, extra spacers are required which you can find here AS-002002-11

Always check that the cardan runs in a straight line against the support bearing after assembly. Otherwise, the hard disk may wear out prematurely.

ATTENTION! It is very important that the gearbox is welded (if it is re-welded with a new sweep) at the correct slope for it to fit perfectly.

Rubber buffer as a spare part you can find here.